230V | 15M LED Strip Light Kit On Drum Winding Spool Exterior Strip Light 

SMD2835 Series - Temporary Lighting Solution (LED Work Light strip with stand for Construction Site Lighting)

With linear LED lighting, the task of mounting temporary lighting is made simple

Winding Spool Exterior Strip Light Features:

1. 15m of LED strip light ready to be connected directly to 230V.

2. Quick and easy install. Plug & Play.

3. Parallel wiring to each LED ensures that if one LED goes out,the rest of the strip will continue to be illuminated so that the work can continue.

4. Rough and robust built enclosure made for tough conditions.

5. All packed up on a portable reel drum that makes it easy to handle and store.

Winding Spool Exterior Strip Light  Specification

Voltage:	230V~ 50/60Hz
LED Color:	3000K,4000K,6000K
Beam Angle:	120°
LED Package:	SMD2835
CRI:	Ra80+
Luminous flux:	1500 lm/M
LED Spacing:	180 LEDS/M
Wattage	12W/M
Operation Temp.:	-20°C ~ +45°C
Storage Temp:	-10°C ~ +30°C
Housing Material:	PVC
Power Factor:	>0.95
Wire gauge:	20 AWG
LENGTH:	15M
Rating	Indoor/Outdoor; IP65
Protection Class:	Class II

NOTE: The luminous flux and wattage is allowed to float with ± 10%

LED Work Light strip with stand Details

 

LED Work Light Applications

LED Work Strip Light Certifications (more details)

Work Light Package Details

Qty	MEAS	G.W	N.W
1Set/CTN	30X21X36CM	4.0KG	3.5KG
2Set/CTN	44X32X38CM	9.0KG	8.5KG

Work Light Warranty

TS products are guaranteed for 3 years. The guarantee condition is any performance failure occurs within warranty period caused by non-human damage. There is no charge for replacing or repairing defective products.
If the quality problems of the returned products are caused by our company, we will replace or repair the defective products; if customers could not accept the solution for replacing or repairing the defective products, the payment of defective products will be refund to buyer's bank account or credit buyer's account in Nedar for future orders.
TS will not reimburse or pay for unexpected costs or expenses, including without limitation labor or other costs associated with removal or reinstallation of the product, even if it is ultimately deemed to be defective.
Exceptions:
1) Product had been modified by the user.
2) Product was not installed or maintained according to manual or specification accompanied.
3) Product was subject to unusual physical or electrical stress, misuse, or negligence.
4) Product was non-defective or product defect was not related to Nedar product functionality, including third- party modifications.
5) Other damages caused after receipt of product by customer.
6) If returned product is found to be non-damaged, the product will be returned to customer, at customer's expense.
7) Updated July 01, 2020

Any return without authorization of Nedar will not be accepted.